Not sure if your cylinder is out of CO2? Check out the steps below for the cylinder that is compatible with your Sparkling Water Maker:
Quick Connect Cylinder
* This video is relevant for ALL Sparkling Water Makers compatible with the Quick Connect Cylinder
- Make sure the cylinder is properly inserted in the cylinder holder, with the cylinder handle lowered.
*** Please note - the cylinder handle might be either Black or Pink *** - Press the carbonating button/lever and check if you see CO2 entering the bottle.
- Press the button/lever a few times and check for bubbles.
- Listen for a sputtering sound when you press the button.
Screw-in System Cylinder
* This video is relevant for ALL Sparkling Water Makers compatible with the Screw-in system Cylinder
- Make sure the cylinder is properly inserted in the cylinder holder:
> Screw the cylinder counter-clockwise while applying gentle pressure until it is firmly held in place.
> Do not use tools and make sure the cylinder is secured in its place. - Press the carbonating button and check if you see CO2 entering the bottle.
- Press the button a few times and check for bubbles.
- Listen for a sputtering sound when you press the button.
Sparkle Tip:
SodaStream recommends keeping a back-up carbonating cylinder handy so you can keep enjoying fresh, fizzy drinks without interruption while you exchange the empty carbonator.
Out of CO2? Don’t worry! Click here to find your nearest retailer or here for online CO2 order.