Check out the video and user manual below:
- Fill the plastic carbonating bottle with cold water up to the fill line.
WARNING! Do not carbonate anything other than water. Other liquids can contaminate and clog internal parts, potentially resulting in excessive pressure, bottle failure during carbonation and serious injury. Never carbonate after flavoring has been added.
The SodaStream ensō™ Sparkling Water Maker is compatible with (i)1L SodaStream fuse plastic carbonating bottle; (ii) 0.5L fuse SodaStream plastic carbonating bottles; (iii) 1L classic SodaStream plastic carbonating bottles; and (iv) 1L SodaStream ensō™ plastic carbonating bottles.
- To insert the plastic carbonating bottle, make sure that the carbonating bottle rest is angled forward. Please make sure you do not pull the carbonating tube. Insert the Plastic Carbonating Bottle neck into the Snap-Lock system.
- Push the Plastic Carbonating Bottle up and back. The Snap-Lock will hold the Plastic Carbonating Bottle.
WARNING! Never use a Sparkling Water Maker with a broken carbonating tube. This can cause excessive pressure, bottle failure and serious injury.
Note: When inserted correctly, there is a small gap between the bottom of the Plastic Carbonating Bottle and the base. Do not carbonate if the Plastic Carbonating Bottle is resting on the base, or water will splash out.
- To carbonate, press the carbonating button in short 1 second presses; 3 presses for standard carbonation and 5 presses for strong carbonation.
- When the desired level of carbonation is achieved, gently pull the plastic carbonating bottle towards you until it reaches its fully forward position. This will release the pressure in the plastic carbonating bottle and allow the plastic carbonating bottle to be released from the Snap-Lock mechanism.
Please Note: You may see small pieces of ice may appear in the water during carbonation of very cold water. Any ice created will melt.
WARNING! Do not remove Plastic Carbonating Bottle until after hearing the sound of excess CO2 being released. Never force the Plastic Carbonating Bottle out of the Snap-Lock. Always allow the Sparkling Water Maker to release the Plastic Carbonating Bottle. If the Plastic Carbonating Bottle does not immediately release, then push the Plastic Carbonating Bottle back into the vertical position and gently pull it towards you again. Attempting to remove the Plastic Carbonating Bottle while it is still pressurized can cause uncontrolled ejection of the Plastic Carbonating Bottle and may result in serious injury.
Click here to see the SodaStream enso™ Sparkling Water Maker user manual.
Questions? Contact us via email or phone 0800 – 0223637.